Call UsCall Us :

4 Channel Digital Video Optical Transceiver

4 Channel Digital Video Optical Transceiver
4 Channel Digital Video Optical Transceiver
Send Inquiry
Product Code : MT-60
Product Description

Model : SWV604003onedata digital video optical transceivers SWV60400 series can simultaneously transmit 4 channels of 8-bit digitally encoded broadcast quality video/return or bidirectional data/unidirectional or bidirectional audio/Ethernet/Telephone/Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of installation and operation. Electronic and optical adjustments are never required. LED indicators are provided for instantly monitoring system status. Devices are available for either standalone or rack-mount installation, which is suitable for different working environment.


  • 8-bit digitally encoded and non-compression broadcast quality video transmission 
  • Directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232, RS-422, and RS-485 data protocols
  • Support any high-resolution video signal 
  • Automatic compatible PAL, NTSC and SECAM video system 
  • Power supply and other parameter state indication, which can monitor the operation condition of system 
  • Support no-damage regenerative trunk of video 
  • Constant input optical power, and large dynamic range ,no Electrical or Optical Adjustments Required 
  • Special ASIC design
  • Industry-grade of operating temperature from -10°C to 65°C , which is applied to the different working environment
  • Hot-swap function 
  • Stand-alone type or card-type installed in 19"4U rack-mount chassis

Technical Specification

  • Video channels???4 channels
  • Video bandwidth???8 MHz
  • Automatic compatible video system???PAL, NTSC, SECAM
  • Video input/output impedance???75 Ω(unbalance)
  • Video signal-to-noise ratio???≥67dB
  • Differential gain???(10%-90%APL) DG <1% ( typical value)
  • Differential phase???(10%-90%APL) DP <0.7° ( typical value)
  • Video connector???BNC

Fiber-optic Specification

  • F/O connector: FC/ST/SC
  • TX ???Power:-15 ~ -8dBm Sensitivity :≤-35dBm 
  • RX???Power:-15 ~ -8dBm Sensitivity :≤-35dBm
  • Transmission Distance :20KM (single mode)
  • Operating Wavelength: TX1310/RX1550nm (Transmitter); TX1550/RX1310nm (Receiver)

Specification of custom-made options

1. Data

  • Connector: Terminal Blocks
  • Encoded type : RS485 / RS422 / RS232 / Manchester
  • Data rate : 0 - 400Kbps
  • BER: ≤10-9

2. Audio

  • Connector: Terminal Blocks
  • Audio input / output impedance :600Ω(Balance/ unbalance)
  • Audio input / output voltage :2Vp-p ( typical value)
  • Audio input / output level :0dBm ( typical value)
  • Video bandwidth:10HZ~12KHZ
  • Audio digital encoded bandwidth :24bit
  • Audio signal-to-noise ratio: S/N≥95dB (weighted)

3. Telephone

  • Connector: RJ11
  • Bandwidth :8KHZ
  • Features???Support call-showing function ;support H-F
  • Operating mode : Point to point hotline mode / FXS-FXO

4. Ethernet

  • Connector: RJ45
  • Support mode : Half duplex or Full duplex
  • Standards???IEEE802.3 
  • Data rate : 10M / 100Mbps 
  • Bandwidth: 25M


  • Dimensions: 19.2(L)×17.3(W)×2.8(H) cm
  • Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit )
  • Operating Temperature: -10°C to +65°C
  • Storing Temperature: -45°C to +85°C
  • Humidity: 0 to 95% non-condensing
  • MTBF: ≥10 5 hours

Warranty: 5 years
Approvals: FCC,CE, RoHS approvals


"We are accepting local inquiries only in Tamil Nadu."